1. Remove the clip (A) from the air intake boot. 2. Loosen the clamp (B) securing the air cleaner case (rear) to the air intake boot. 3. Loosen the clamp (C) which secures the throttle body to the air intake boot.
4. Disconnect the PCV hose and remove the air intake boot. |
Air intake boot
InspectionElectrical component location location
1. ENGINE COMPARTMENT(1)Pressure sensor(2)A/C compressor(Refrigerant flow sensor, variable flow change solenoid)(3)Ambient sensor2. PASSENGER COMPARTMENT(1)Evaporator sensor(5)Sunload sensor(9)A/C control panel(2)Air mix door actuator*1 or air mix door actuator LH*2(6)Intake door actuator(10)Air mix ...