1. Clean the external circumference of antenna wire and around with alcohol or appropriate cleaning solvent. 2. Paste a thin masking film on the glass along broken wire. 3. Apply the conductive silver composition on the broken portion with a drawing pen. Conductive silver composition: DUPONT No. 4817 or equivalent
4. Dry out the deposited portion. 5. After repair has been completed, measure the resistance in repaired wire and check that it is normal. |
Hill descent control function
The hill descent control function will be in
standby mode when the X-mode is activated
and the vehicle speed is less than
approximately 12 mph (20 km/h).
The function will operate when the vehicle
speed is less than approximately 12 mph
(20 km/h) and the accelerator ratio is less
than appro ...