Subaru Legacy BN/BS (2015-2019) Owners Manual: Replacing battery of access key

Subaru Legacy BN/BS (2015-2019) Owners Manual / Maintenance and service / Replacing battery / Replacing battery of access key

CAUTION When removing or fitting the access key cover, make sure that the plastic part does not come off or become misaligned.

Battery: Button battery CR2032

Replacing battery of access key

1) Release button
2) Mechanical key

Take out the mechanical key.

Replacing battery of access key

Wrap a flat-head screwdriver with vinyl tape or a cloth, and insert it in the gap to remove the cover.

Replacing battery of access key

Take out the battery using a flat-head screwdriver with vinyl tape or a cloth.

Replacing battery of access key

Insert a new battery with its positive (+) side facing upward as shown in the figure.

Replacing battery of access key

Attach the cover to the access key by fitting the projections and recesses together.

Replacing battery

The access key / transmitter battery may be discharged under the following conditions. The operation of the keyless access function is unstable The operating distance of the remot ...

Replacing battery of transmitter

Open the key head using a flat-head screwdriver. Remove the transmitter case from the key head. Open the transmitter case by releasing the hooks. 1) Negative (− ...

Other materials:

Removal
CAUTION:Refer to “CAUTION” of “General Description” before handling the airbag system components. General Description > CAUTION1. Turn the ignition switch to OFF.2. Disconnect the ground terminal from the battery sensor, and wait for at least 60 seconds before starting work. ...