Subaru Legacy BN/BS (2015-2019) Service Manual: Specification

Subaru Legacy BN/BS (2015-2019) Service Manual / Vehicle dynamics control (vdc) / Brake lamp relay / Specification

1. CONDITIONS TO COMPLETE BRAKE LAMP LIGHTING OPERATION MODE

When the following conditions develop, the brake lamp lighting operation mode stops and the normal control mode is restored.

• When the speed of at least one wheel reaches 4 km/h (2 MPH).

• When brake lamp lighting operation mode ends.

• When a malfunction is detected.

Note

For brake light relay, refer to “Relay and Fuse”. Relay and Fuse ...

Other materials:

Removal
1. Disconnect the ground terminal from battery sensor. NOTE2. Lift up the vehicle, and then remove the rear wheels.3. Remove the nut - axle.CAUTION:Do not loosen the nut - axle while the rear axle is loaded. Doing so may damage the hub unit COMPL.(1) Lift the crimped section of the nut - axle.(2) R ...