Subaru Legacy BN/BS (2015-2019) Owners Manual: Trailer safety chains

Subaru Legacy BN/BS (2015-2019) Owners Manual / Driving tips / Trailer towing (Outback) / Connecting a trailer / Trailer safety chains

WARNING Always use safety chains between your vehicle and the trailer. Towing trailer without safety chains could create a traffic safety hazard if the trailer separates from the hitch due to coupling damage or hitch ball damage.

In case the trailer hitch connector or hitch ball should break or become disconnected, the trailer could get loose and create a traffic safety hazard.

For safety, always connect the towing vehicle and trailer with trailer safety chains. Two chains should be used in total, one to the right side and the other to the left side trailer tongue. Pass the chains crossing each other under the trailer tongue to prevent the trailer from dropping onto the ground in case the trailer tongue should disconnect from the hitch ball.

Allow sufficient slack in the chains taking tight turn situations into account; however, be careful not to let them drag on the ground.

Trailer brakes

WARNING Adequate size trailer brakes are required when the trailer and its cargo exceed 1,000 lbs (453 kg) total weight. Do not directly connect your trailer ...

Side mirrors

After hitching a trailer to your vehicle, check that the standard side mirrors provide a good rearward field of view without significant blind spots. If significant blind spots occur with ...

Other materials:

Procedure
CAUTION:Do not turn the power of the Subaru Select Monitor OFF during work, and do not disconnect the data link connector.1. Shift the select lever to “P” range.2. Apply the electronic parking brake.3. Lift up the vehicle.WARNING:Lift up the vehicle until the tire bottom is 30 cm or more ...