Subaru Legacy BN/BS (2015-2019) Owners Manual: When the rear gate cannot be closed

Subaru Legacy BN/BS (2015-2019) Owners Manual / In case of emergency / Power rear gate - if power rear gate does not operate properly / When the rear gate cannot be closed

CAUTION

On areas which are not flat, such as hills, do not conduct any of the following actions. The rear gate may close suddenly and hit someone's head, face or catch fingers and body parts in it, resulting in injury.
Even while conducting the following actions on a flat surface, be careful not to be injured by getting caught in or hit by the rear gate.
When operating the power rear gate manually, do not use excessive force. Doing so may cause a malfunction.
After closing the rear gate by the following methods, we recommend that you have the vehicle checked at a SUBARU dealer.

If the rear gate cannot be closed due to a dead battery, etc., while the rear gate is stopped midway, it can be closed by hand.

Gently close the rear gate by hand until it reaches the half-shut position.
Operate the power rear gate to confirm it is recovered.

When the power rear gate is deactivated

CAUTION When operating the power rear gate manually, do not use excessive force. Doing so may cause a malfunction. NOTE While the power rear gate is temporarily deactivated, if ...

If your vehicle is involved in an accident

CAUTION If your vehicle is involved in an accident, be sure to inspect the ground under the vehicle before restarting the engine. If you find that fuel has leaked on the ground, ...

Other materials:

General scan tool operation
1. HOW TO USE GENERAL SCAN TOOL1. Prepare a scan tool (general scan tool) required by SAE J1978.2. Connect the general scan tool to data link connector located in the lower portion of the instrument panel (on the driver’s side).3. Using the general scan tool, call up each data. General scan to ...