Subaru Legacy BN/BS (2015-2019) Service Manual: Adjustment

Subaru Legacy BN/BS (2015-2019) Service Manual / Continuously variable transmission(tr690) / Extension case / Adjustment

NOTE:

When replacing the extension case, select the shims for rear drive shaft thrust needle bearing and transfer reduction driven gear. Rear Drive Shaft > ADJUSTMENT Transfer Reduction Driven Gear > ADJUSTMENT

Removal

1. Remove the transmission assembly from the vehicle. Automatic Transmission Assembly > REMOVAL2. Remove the front wheel speed sensor. Front Wheel Speed Sensor > REMOVAL3. Remove the harness clip, a ...

Installation

1. Clean the mating surface of the extension case and intermediate case.2. Select the thrust needle bearing. Rear Drive Shaft > ADJUSTMENT3. Select the shim for transfer reduction driven gear. Trans ...

Other materials:

Removal
1. Disconnect the ground terminal from battery sensor. NOTE2. Remove the air intake duct. (RH side only) Air Intake Duct > REMOVAL3. Disconnect the connector (A) from the camshaft position sensor, and remove the camshaft position sensor from the chain cover.• RH side• LH side ...