Subaru Legacy BN/BS (2015-2019) Service Manual: Adjustment

Subaru Legacy BN/BS (2015-2019) Service Manual / Differentials / Rear differential (va-type) / Adjustment

1. SIDE GEAR BACKLASH

Adjust the side gear backlash. Rear Differential (VA-type) > ASSEMBLY

2. HYPOID DRIVEN GEAR BACKLASH

Adjust hypoid driven gear backlash. Rear Differential (VA-type) > ASSEMBLY

3. TOOTH CONTACT BETWEEN HYPOID DRIVEN GEAR AND DRIVE PINION

Adjust the tooth contact between hypoid driven gear and drive pinion gear. Rear Differential (VA-type) > ASSEMBLY

Removal

The removal procedure for VA-type is included in “REMOVAL” for T-type. Rear Differential (T-type) > REMOVAL ...

Installation

The installation procedure for VA-type is included in “INSTALLATION” for T-type. Rear Differential (T-type) > INSTALLATION ...

Other materials:

Inspection
1. Moving the rear tire up and down by hand, check there is no backlash in bearing, and check the wheel rotates smoothly.CAUTION:If there is any fault in the bearing, replace the hub unit COMPL - rear axle.2. Inspect axial play of the hub unit bearing.(1) Remove the tire and disc rotor.(2) Inspect t ...