Subaru Legacy BN/BS (2015-2019) Service Manual: Installation

Subaru Legacy BN/BS (2015-2019) Service Manual / Differentials / Rear differential (va-type) / Installation

The installation procedure for VA-type is included in “INSTALLATION” for T-type. Rear Differential (T-type) > INSTALLATION

Adjustment

1. SIDE GEAR BACKLASHAdjust the side gear backlash. Rear Differential (VA-type) > ASSEMBLY2. HYPOID DRIVEN GEAR BACKLASHAdjust hypoid driven gear backlash. Rear Differential (VA-type) > ASSEMBLY3. T ...

Inspection

Wash all the disassembled parts clean, and examine them for wear, damage or other defects. Repair or replace the defective parts as necessary.1. Hypoid driven gear and drive pinion• If there is ...

Other materials:

Preparation for overhaul procedure
1. After removing the engine from the vehicle body, attach the ST to the engine as shown in the figure.NOTE:When using a commercially sold engine stand, follow the instructions of engine stand used.Tightening torque:35 N·m (3.6 kgf-m, 25.8 ft-lb)ST 18232AA000ENGINE STAND2. In this section ...