Subaru Legacy BN/BS (2015-2019) Owners Manual: Air inlet selection
Select the air inlet by pressing the air inlet selection button.
ON position (recirculation): Interior air is
recirculated inside the vehicle. Press the
air inlet selection button to the ON position
for fast cooling with the air conditioner or
when driving on a dusty road. When the
ON position is selected, the " OFF position (outside air): Outside air is drawn into the passenger compartment. Press the air inlet selection button to the OFF position when the interior has cooled to a comfortable temperature and the road is no longer dusty. The indicator light will turn off.
|
"
indicator
light on the information display (type A)/
the indicator light on the air inlet selection
button (type B) illuminates.
Air conditioner control
The air conditioner operates only when
the engine is running.
Press the air conditioner button while the
fan is in operation to turn on the air
conditioner. When the air conditioner is
on, the ...
Defrosting
Select the desired " " mode or "
" mode
to defrost or dehumidify the windshield
and front door windows by performing the
following procedures.
To select the " "
mode, press the
defr ...
Other materials:
Dtc p2270 o2 sensor signal biased/stuck lean bank 1 sensor 2
DTC DETECTING CONDITION:Detected when two consecutive driving cycles with fault occur.CAUTION:After servicing or replacing faulty parts, perform Clear Memory Mode Clear Memory Mode > OPERATION, and Inspection Mode Inspection Mode > PROCEDURE.WIRING DIAGRAM:• Engine Electrical System ENGINE T ...
