Subaru Legacy Service Manual: Assembly

Subaru Legacy Service Manual / Instrumentation driver info / Combination meter / Assembly

1. Install the lens.

2. Install the outer mask.

Removal

CAUTION:When the combination meter is replaced, perform the variant work. Combination Meter System > OPERATION1. Disconnect the ground terminal from battery sensor. NOTE2. Release the lock, tilt the ...

Installation

CAUTION:• Make sure the electrical connector is connected securely.• Make sure that each meter operates normally.• When the combination meter assembly of the model without keyless ac ...

Other materials:

Removal
1. Remove the transmission assembly. Automatic Transmission Assembly > REMOVAL2. Remove the air breather hose. Air Breather Hose > REMOVAL3. Remove the control valve body. Control Valve Body > REMOVAL4. Remove the transmission harness. Transmission Harness > REMOVAL5. Remove the turbine speed se ...