Subaru Legacy BN/BS (2015-2019) Service Manual: Assembly

Subaru Legacy BN/BS (2015-2019) Service Manual / Manual transmission and differential(6mt) / Center differential / Assembly

Install the ball bearings.

CAUTION:

Do not apply a load in excess of 10 kN (1 ton, 1.1 US ton, 1.0 Imp ton).

NOTE:

Use a new ball bearing.

(A)	Ball bearing

Removal

1. Remove the manual transmission assembly from the vehicle. Manual Transmission Assembly > REMOVAL2. Remove the back-up light switch and the neutral position switch. Switches and Harness > REMOVAL3 ...

Installation

1. Install the center differential and transfer driven gear into the transfer case as a unit. Transfer Driven Gear > INSTALLATION2. Select the adjusting washer. Transfer Case and Extension Case Asse ...

Other materials:

Adjustment
1. THRUST BEARING PRELOAD1. Select a suitable adjusting washer No. 1 so that dimension (H) will be zero in a visual check. Position the washer (20 - 31 - 4) and lock washer (20 - 31 - 2.3) and attach the lock nut (20 - 11).2. Install the lock nut with ST1, ST2 and ST3.NOTE:• Use new lock nuts ...