Subaru Legacy BN/BS (2015-2019) Service Manual: Assembly

Subaru Legacy BN/BS (2015-2019) Service Manual / Mechanical(h4do) / Chain cover / Assembly

1. Install the camshaft position sensor. Camshaft Position Sensor > INSTALLATION

2. Install the oil control solenoid. Oil Control Solenoid > INSTALLATION

3. Install the engine oil temperature sensor. Engine Oil Temperature Sensor > INSTALLATION

4. Install the oil pressure switch. Oil Pressure Switch > INSTALLATION

5. Install the engine oil filter and the oil pump union. Engine Oil Filter > INSTALLATION

6. Install the oil filler cap.

Removal

NOTE:When replacing a single part, perform the work with the engine assembly installed to body.1. When working on the vehicleNOTE:When working on the vehicle, perform the following steps also.(1) Remo ...

Installation

1. Install the O-rings to cylinder head RH, cylinder head LH, cylinder block LH and oil pan upper.NOTE:• Use new O-rings.• Apply a coat of engine oil to the O-rings.2. Apply liquid gasket ...

Other materials:

Tire pressures and wear
Maintaining the correct tire pressures helps to maximize the tires' service lives and is essential for good running performance. Check and, if necessary, adjust the pressure of each tire (including the spare) at least once a month (for example, during a fuel stop) and before any long journe ...