Subaru Legacy BN/BS (2015-2019) Service Manual: Audio

Installation

1. RADIO ANTENNA AMPLIFIER1. Install the amplifier assembly - antenna.Tightening torque:12±3 N·m (1.2±0.3 kgf-m, 8.9±2.2 ft-lb)2. Install the trim panel - rear pillar UPR LH. (Sedan model)3. ...

Removal

1. Disconnect the ground terminal from battery sensor. NOTE2. Remove the center grille assembly. Air Vent Grille > REMOVAL3. Remove the heater control assembly. Control Panel > REMOVAL4. Remove the ...

Other materials:

Removal
1. Disconnect the ground terminal from battery sensor. NOTE2. Remove the light assembly - door step.CAUTION:• Use a dry clean cloth so that no grease or water adheres to the glass portion of the bulb.• When using a flat tip screwdriver, apply protective tape or cloth and be careful not ...