1.PERFORM CUSTOMER INTERVIEW. Using the Check List for Interview, ask the customer the condition of how the trouble occurred. Check List for Interview > CHECK | Did you interview the customer- | Basic Diagnostic Procedure > PROCEDURE | Interview the customer. Check List for Interview > CHECK |
2.INITIALIZATION OF PRG SYS. 1) Open the PRG manually. 2) Manually close PRG to the partially latched position, and operate the auto closer to fully close PRG. 3) Press any of the PRG operation switches to perform the automatic operation of PRG. Power Rear Gate System > PROCEDURE | Is the initialization operation possible- | Basic Diagnostic Procedure > PROCEDURE | Basic Diagnostic Procedure > PROCEDURE |
3.CHECK LAN SYSTEM. Inspect LAN system. Basic Diagnostic Procedure > PROCEDURE | | Perform the inspection according to the diagnosis for LAN system. | Basic Diagnostic Procedure > PROCEDURE |
4.CHECK POWER REAR GATE SYSTEM. Using the Subaru Select Monitor, read DTC of power rear gate system. Read Diagnostic Trouble Code (DTC) NOTE: If the communication function of the Subaru Select Monitor cannot be executed properly, check the communication circuit. Subaru Select Monitor > COMMUNICATION FOR INITIALIZING IMPOSSIBLE | | Record DTC and perform the diagnosis according to the DTC. List of Diagnostic Trouble Code (DTC) > LIST | Basic Diagnostic Procedure > PROCEDURE |
5.CHECK DIAGNOSTICS WITH PHENOMENON. Check “Diagnostics with Phenomenon”. Diagnostics with Phenomenon | | Perform diagnosis according to the procedures in the diagnostics with phenomenon. | Currently, system is normal. A temporary poor contact may be a possible cause. Therefore, check the harness connector. |
Check list for interview check