Subaru Legacy BN/BS (2015-2019) Owners Manual: Basic operation

Subaru Legacy BN/BS (2015-2019) Owners Manual / Audio / Audio set / Basic operation

This section describes some of the basic features of the audio/visual system. Some information may not pertain to your system.

Your audio/visual system works when the ignition switch is turned to the "ACC" or "ON" position.

CAUTION To prevent the battery from being discharged, do not leave the audio/ visual system on longer than necessary when the engine is not running.

NOTE Some functions can also be operated by using the voice command system.

For details, refer to "Voice command system" .

Connecting and disconnecting a USB memory/portable device

The USB port and the AUX jack are located as shown in the following illustration. NOTE This unit does not support commercially available USB hubs. Turn on the power of the de ...

Turning the system on and off

Press the power/VOLUME knob to turn the audio/visual system on and off. When the system turns on, the mode that was in use the last time the system was turned off will be displayed. Press and ...

Other materials:

Dtc p2770 torque converter clutch circuit high
DTC DETECTING CONDITION:Immediately at fault recognitionTROUBLE SYMPTOM:No lock-up occurs.WIRING DIAGRAM:CVT control system CVT Control System > WIRING DIAGRAMSTEPCHECKYESNO1.CHECK HARNESS.1) Turn the ignition switch to OFF.2) Disconnect the TCM and transmission connectors.3) Measure the resistance ...