Subaru Legacy BN/BS (2015-2019) Service Manual: Caution
• When performing any work, always wear work clothes, a work cap and protective shoes. Additionally, wear a helmet, protective goggles, etc. if necessary. • When performing a repair, identify the cause of trouble and avoid unnecessary removal, disassembly and replacement. • Some vehicle components are extremely hot immediately after driving. Be wary of receiving burns from heated parts. • Use SUBARU genuine grease, the recommended or equivalent. Do not mix grease etc. of different grades or manufacturers. • Be sure to tighten fasteners including bolts and nuts to the specified torque. • Always use the jack-up point when the shop jacks or rigid racks are used to support the vehicle. • Apply grease onto sliding or revolving surfaces before installation. • Be sure that the surface of brake disc, brake pad or brake shoe is free from grease or oil. |
Specification
ItemSpecificationTypeElectric typeClearance adjustmentAutomatic adjustingOperation methodSwitch type ...
Preparation tool
1. SPECIAL TOOLILLUSTRATIONTOOL NUMBERDESCRIPTIONREMARKS — (Newly adopted tool)SUBARU SELECT MONITOR 4Used for setting of each function and troubleshooting for electrical system.NOTE:For detailed op ...
Other materials:
Assembly
1. Install the new ball bearing (large) to reduction driven gear using the ST.ST 499277100BUSHING 1-2 INSTALLERNOTE:• Use a new ball bearing.• Install to the splines inside transfer reduction driven gear shaft.2. Install the new ball bearing (small) to reduction driven gear.NOTE:Use a ...
