Subaru Legacy BN/BS (2015-2019) Owners Manual: CHECK ENGINE warning light/Malfunction indicator light

Subaru Legacy BN/BS (2015-2019) Owners Manual / Instruments and controls / Warning and indicator lights / CHECK ENGINE warning light/Malfunction indicator light

CAUTION If the CHECK ENGINE warning light/ malfunction indicator light illuminates while you are driving, have your vehicle checked/repaired by your SUBARU dealer as soon as possible. Continued vehicle operation without having the emission control system checked and repaired as necessary could cause serious damage, which may not be covered by your vehicle's warranty.

If this light illuminates steadily or blinks while the engine is running, it may indicate that there is a problem or potential problem somewhere in the emission control system.

Front passenger's frontal airbag ON and OFF indicators

NOTE For details about the operating conditions of SRS seat cushion airbag, refer to "SRS seat cushion airbag operation" . ON/ : Front passenger's frontal airbag ON indicator / : Front ...

If the light illuminates constantly

If the light illuminates constantly while driving or does not turn off after the engine starts, an emission control system malfunction has been detected. You should have your vehicle checked by ...

Other materials:

Inspection mode operation
DTC can be diagnosed by executing the Inspection Mode. After correcting the DTC, perform a necessary inspection mode and make sure that the function is resumed correctly and the DTC is recorded.1. Perform the Clear Memory Mode. Clear Memory Mode2. Read the DTC and check that the DTC is not displaye ...