Subaru Legacy BN/BS (2015-2019) Owners Manual: Cruise control indicator

Subaru Legacy BN/BS (2015-2019) Owners Manual / Instruments and controls / Warning and indicator lights / Cruise control indicator

This indicator appears when the cruise control main button is pressed to activate the cruise control function. For details, refer to "To set cruise control" .

CAUTION If the CHECK ENGINE warning light/ malfunction indicator light illuminates, the cruise control indicator flashes at the same time. At this time, do not drive at high speed and have your vehicle inspected at a SUBARU dealer as soon as possible.

Cruise control set indicator

This indicator appears when vehicle speed has been set to use the cruise control function

Turn signal indicator lights

These lights show the operation of the turn signal or lane change signal. If the indicator lights do not blink or blink rapidly, the turn signal bulb may be burned out. Replace the bulb as soon ...

Automatic headlight beam leveler warning light (models with HID headlights)

This light illuminates when the automatic headlight beam leveler does not operate normally. If this light illuminates while driving or does not turn off approximately 3 seconds after turning th ...

Other materials:

Specification
1. HEATER SYSTEMItemSpecificationsConditionHeating capacity4.8 kW (4,127 kcal/h, 16,377 BTU/h) or more• Air flow control switch: FOOT• Temperature control dial: HI (MAX HOT)• Temperature difference between hot water and inlet air: 65°C (149°F)• Hot water flow ra ...