The defogger and deicer system is activated only when the ignition switch is in the "ON" position.
To activate the defogger and deicer system, press the control switch. The rear window defogger, outside mirror defogger and windshield wiper deicer are activated simultaneously. The indicator light on the control switch illuminates while the defogger and deicer system is activated. To turn them off, press the control switch again. They also turn off when the ignition switch is turned to the "ACC" or "LOCK"/ "OFF" position. The defogger and deicer system will automatically shut off after approximately 15 minutes. If the rear window and outside mirrors have been cleared and the windshield wiper blade rubbers have been deiced completely before that time, press the control switch to turn them off. If defrosting, defogging or deicing is not complete, you have to press the control switch to turn them on again. It is possible to set the defogger and deicer system for the continuous operation mode by operating the multi information display. For details, refer to "Defogger" .
NOTE
|
Rear window wiper and washer switch (Outback)
MirrorsDtc b1698 door sensor lh initialization incomplete
DIAGNOSIS START CONDITION:Ignition voltage is 10 V to 16 V.DTC DETECTING CONDITION:Front door impact sensor LH unit malfunction (sensor type abnormal, sensor unit initialization error)CAUTION:Before performing diagnosis, refer to “CAUTION” in “General Description”. General D ...