Subaru Legacy BN/BS (2015-2019) Service Manual: Dtc b28aa stereo camera microcomputer 1

Subaru Legacy BN/BS (2015-2019) Service Manual / Eyesight (diagnostics) / Diagnostic procedure with diagnostic trouble code (dtc) / Dtc b28aa stereo camera microcomputer 1

Detected when communication error occurs due to malfunction of microcomputer inside the stereo camera.

DTC DETECTING CONDITION:

Communication error occurs due to malfunction of microcomputer inside the stereo camera.

TROUBLE SYMPTOM:

All functions of EyeSight system do not operate.

Refer to DTC B28A6 for diagnostic procedure. Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC B28A6 INTERNAL STEREO CAMERA COMMUNICATION 1

Dtc b28ab stereo camera microcomputer 2

Detected when communication error occurs due to malfunction of microcomputer inside the stereo camera.DTC DETECTING CONDITION:Communication error occurs due to malfunction of microcomputer inside the ...

Dtc b28a9 stereo camera synchronized recognition data

Detected when error occurs in the communication data inside the control module caused by external factors such as noises.NOTE:If the same DTC is still detected after the engine has restarted, replace ...

Other materials:

Installation
NOTE:• Use a new gasket.• Be sure to install the clutch hose with the mark side facing upward.• Be careful not to twist the clutch hose during installation.• Before installing the operating cylinder, apply grease to the contact point of the release lever and operating cylinde ...