Subaru Legacy BN/BS (2015-2019) Service Manual: Disassembly

Installation

CAUTION:• For parts which are not reusable, always use new parts.• Always tighten the bushing in the state where the vehicle is at curb weight and the wheels are in full contact with the g ...

Rear shock absorber

...

Other materials:

Installation
1. Install the engine coolant temperature sensor, and connect the connector to the engine coolant temperature sensor.NOTE:Use a new gasket.Tightening torque:22 N·m (2.2 kgf-m, 16.2 ft-lb)2. Connect the ground terminal to battery sensor. NOTE3. Fill engine coolant. Engine Coolant > REPLACEME ...