Subaru Legacy BN/BS (2015-2019) Service Manual: Dtc b11fc side impact deployment

Subaru Legacy BN/BS (2015-2019) Service Manual / Airbag system (diagnostics) / Diagnostic chart with trouble code / Dtc b11fc side impact deployment

DIAGNOSIS START CONDITION:

Ignition voltage is 10 V to 16 V.

DTC DETECTING CONDITION:

Side impact ignition, door sensor LH ignited

NOTE:

For details on DTC B11FC, refer to DTC B11F7. Diagnostic Chart with Trouble Code > DTC B11F7 SIDE IMPACT DEPLOYMENT

Dtc u0155 lost communication with instrument panel cluster (ipc) control module

DTC DETECTING CONDITION:Detected when CAN data from combination meter does not arrive.NOTE:Perform the diagnosis for LAN system. Basic Diagnostic Procedure > PROCEDURE ...

Dtc b11fb side impact deployment

DIAGNOSIS START CONDITION:Ignition voltage is 10 V to 16 V.DTC DETECTING CONDITION:Side impact ignition, door sensor RH ignitedNOTE:For details on DTC B11FB, refer to DTC B11F7. Diagnostic Chart with ...

Other materials:

Preparation for overhaul procedure
1. Clean oil, grease, dirt and dust from the transmission.2. Using the TORX® bit T70, remove the drain plug, and drain the transmission gear oil completely.3. Tighten the drain plug using TORX® bit T70.NOTE:Use a new gasket.Tightening torque:44 N·m (4.5 kgf-m, 32.5 ft-lb) (aluminum gasket, ...