DTC DETECTING CONDITION: Detected when CAN data from combination meter does not arrive. NOTE: Perform the diagnosis for LAN system. Basic Diagnostic Procedure > PROCEDURE |
Dtc u0401 invalid data received from ecm/pcm "a"
Dtc b11fc side impact deploymentDtc c2548 vehicle dynamics control module system
DTC DETECTING CONDITION:When error flag from VDCCM is detected for 2 seconds after the ignition switch is ON.STEPCHECKYESNO1.CHECK DTC.Read the DTC of VDC system using the Subaru Select Monitor.Is a DTC related to VDC system (sensors) detected-Perform the diagnosis according to the DTC. List of Dia ...