Subaru Legacy BN/BS (2015-2019) Service Manual: Dtc b1625 side airbag sensor lh failure

Subaru Legacy BN/BS (2015-2019) Service Manual / Airbag system (diagnostics) / Diagnostic chart with trouble code / Dtc b1625 side airbag sensor lh failure

DIAGNOSIS START CONDITION:

Ignition voltage is 10 V to 16 V.

DTC DETECTING CONDITION:

Side airbag sensor LH unit internal malfunction

When DTC B1625 is displayed, the circuit within the side airbag sensor LH is faulty.

Replace the side airbag sensor LH. Side Airbag Sensor

Dtc b1627 side airbag sensor lh lost communication

DIAGNOSIS START CONDITION:Ignition voltage is 10 V to 16 V.DTC DETECTING CONDITION:Side airbag sensor LH communication error (open/short circuit or connector connection failure between airbag CM and s ...

Dtc b1623 side airbag sensor rh initialization error

DIAGNOSIS START CONDITION:Ignition voltage is 10 V to 16 V.DTC DETECTING CONDITION:Side airbag sensor RH unit malfunction (sensor type abnormal, sensor unit initialization error)CAUTION:Before perform ...

Other materials:

Disassembly
NOTE:When replacing the coupling sleeve and synchronizer hub, replace them as a set. Because these must engage at the specified point, avoid disassembly as much as possible. If it is necessary to disassemble, mark the engaging points on the splines beforehand.1. Put vinyl tape around the main shaft ...