Subaru Legacy BN/BS (2015-2019) Service Manual: Dtc b11e0 rollover deployment history
DIAGNOSIS START CONDITION: Ignition voltage is 10 V to 16 V. DTC DETECTING CONDITION: This DTC is indicated when the curtain airbag module and the seat belt pretensioner are deployed. Once this DTC is displayed, the memory cannot be cleared. Replace the following parts. • Airbag control module Airbag Control Module • Curtain airbag module (operating side) Curtain Airbag Module • Curtain airbag sensor (operating side) Curtain Airbag Sensor • Front outer seat belt with pretensioner (operating side) Front Seat Belt |
Dtc b11f3 front impact deployment
DIAGNOSIS START CONDITION:Ignition voltage is 10 V to 16 V.DTC DETECTING CONDITION:Front impact ignition, ignition delay (on the 2nd stage ignition)This DTC is indicated when the front airbag module a ...
Dtc u0140 lost communication with body control module
DTC DETECTING CONDITION:Detected when CAN data from body integrated unit does not arrive.NOTE:Perform the diagnosis for LAN system. Basic Diagnostic Procedure > PROCEDURE ...
Other materials:
Installation
CAUTION:If lubricant is spilt over the exhaust pipe, wipe it off with cloth to avoid emission of smoke or causing a fire.1. Before installing rear oxygen sensor, apply the anti-seize compound only to the threaded portion of rear oxygen sensor to make the next removal easier.CAUTION:Never apply anti- ...
