DIAGNOSIS START CONDITION: Ignition voltage is 10 V to 16 V. DTC DETECTING CONDITION: Front impact ignition, ignition delay (on the 2nd stage ignition) This DTC is indicated when the front airbag module and the pretensioner are deployed. Once this DTC is displayed, the memory cannot be cleared. Therefore replace the following parts. • Airbag control module Airbag Control Module • Driver’s airbag module Driver’s Airbag Module • Passenger’s airbag module Passenger’s Airbag Module • Front sub sensor of both sides Front Sub Sensor • Front outer seat belt with pretensioner of both sides Front Seat Belt • Steering roll connector Roll Connector • Occupant detection system (passenger’s seat cushion & frame assembly) Front Seat • Curtain airbag module (if deployed) Curtain Airbag Module • Seat cushion airbag module Seat Cushion Airbag Module |
Dtc p2122 throttle/pedal position sensor/switch "d" circuit low
DTC DETECTING CONDITION:Immediately at fault recognitionTROUBLE SYMPTOM:• Improper idling• Poor driving performanceCAUTION:After servicing or replacing faulty parts, perform Clear Memory Mode Clear Memory Mode > OPERATION, and Inspection Mode Inspection Mode > PROCEDURE.WIRING DIAGRAM: ...