Subaru Legacy BN/BS (2015-2019) Service Manual: Dtc b1661 passenger's airbag on/off indicator failure

Subaru Legacy BN/BS (2015-2019) Service Manual / Airbag system (diagnostics) / Diagnostic chart with trouble code / Dtc b1661 passenger's airbag on/off indicator failure

DIAGNOSIS START CONDITION:

Ignition voltage is 10 V to 16 V.

DTC DETECTING CONDITION:

Passenger’s airbag indicator failure received (CAN signal from combination meter)

NOTE:

Perform the diagnosis for combination meter. Basic Diagnostic Procedure > PROCEDURE

Dtc b169f door sensor failure: abnormal pressure

DIAGNOSIS START CONDITION:Ignition voltage is 10 V to 16 V.DTC DETECTING CONDITION:Front door impact sensor detected value abnormal (difference of the detected pressure values between front door impac ...

Dtc b1652 half connection in airbag sensor assembly connector

DIAGNOSIS START CONDITION:Ignition voltage is 10 V to 16 V.DTC DETECTING CONDITION:Connection failure of airbag CM connectorCAUTION:Before performing diagnosis, refer to “CAUTION” in &ldqu ...

Other materials:

AT OIL TEMP warning light (CVT models)
If this light illuminates when the engine is running, it may indicate that the transmission fluid temperature is too hot. If the light illuminates while driving, immediately stop the vehicle in a safe place and let the engine idle until the warning light turns off. Transmission control syst ...