Subaru Legacy BN/BS (2015-2019) Service Manual: Dtc b1764 occupant detection module calibration uncompleted

Subaru Legacy BN/BS (2015-2019) Service Manual / Occupant detection system (diagnostics) / Diagnostic procedure with diagnostic trouble code (dtc) / Dtc b1764 occupant detection module calibration uncompleted

DTC DETECTING CONDITION:

• Memory writing is incomplete on the front seat delivery.

• Calibration of occupant detection control module is incomplete.

• Occupant detection control module is faulty.

When this DTC is displayed, the occupant detection control module is faulty. Replace the occupant detection system (passenger’s & frame assembly). Front Seat > DISASSEMBLY

Dtc b1765 occupant detection module rom checksum

DTC DETECTING CONDITION:Occupant detection control module is faulty.When this DTC is displayed, the occupant detection control module is faulty.Replace the occupant detection system (passenger’s ...

Dtc b1763 occupant detection module calibration checksum

DTC DETECTING CONDITION:• Malfunction is detected on vehicle delivery or at memory writing for «Rezero».• Occupant detection control module is faulty.STEPCHECKYESNO1.CHECK DTC.Read the D ...

Other materials:

Dtc b1871 open in front seat cushion airbag rh
DIAGNOSIS START CONDITION:Ignition voltage is 10 V to 16 V.DTC DETECTING CONDITION:Open circuit failure (open circuit in rear harness, open circuit in front seat cushion airbag RH, open circuit in airbag CM internal circuit, connector connection failure)CAUTION:Before performing diagnosis, refer to ...