Subaru Legacy BN/BS (2015-2019) Service Manual: Dtc b251a lin connection no-receive data

Subaru Legacy BN/BS (2015-2019) Service Manual / Power rear gate system (diagnostics) / Diagnostic procedure with diagnostic trouble code (dtc) / Dtc b251a lin connection no-receive data

DTC DETECTING CONDITION:

When LIN communication failure is detected for two seconds or more.

TROUBLE SYMPTOM:

The power rear gate does not operate.

NOTE:

For diagnostic procedures, refer to DTC U0230 in BODY CONTROL SYSTEM (DIAGNOSTICS). Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC U0230 LOST COMMUNICATION WITH POWER REAR GATE CONTROL MODULE

Dtc b251b lin connection bus physical

DTC DETECTING CONDITION:When LIN communication failure is detected.TROUBLE SYMPTOM:The power rear gate does not operate.NOTE:For diagnostic procedures, refer to DTC U1673 in BODY CONTROL SYSTEM (DIAGN ...

Dtc b2519 power +b open

DTC DETECTING CONDITION:When power supply malfunction is detected in power system.TROUBLE SYMPTOM:When SW is operated, buzzer sounds and PRG auto-operation does not function.WIRING DIAGRAM:NOTE:For th ...

Other materials:

Dtc b1697 lost communication with door sensor lh
DIAGNOSIS START CONDITION:Ignition voltage is 10 V to 16 V.DTC DETECTING CONDITION:Front door impact sensor LH communication error (open/short circuit or connector connection failure between airbag CM and front door impact sensor, front door impact sensor internal communication circuit failure, CM i ...