Subaru Legacy BN/BS (2015-2019) Service Manual: Dtc p0304 cylinder 4 misfire detected

Subaru Legacy BN/BS (2015-2019) Service Manual / Engine (diagnostics)(h6do) / Diagnostic procedure with diagnostic trouble code (dtc) / Dtc p0304 cylinder 4 misfire detected

NOTE:

For the diagnostic procedure, refer to DTC P0306. Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC P0306 CYLINDER 6 MISFIRE DETECTED

1. OUTLINE OF DIAGNOSIS

NOTE:

For the detection standard, refer to DTC P0301. Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC P0301 CYLINDER 1 MISFIRE DETECTED

Dtc p0327 knock/combustion vibration sensor 1 circuit low bank 1 or single sensor

DTC DETECTING CONDITION:Immediately at fault recognitionTROUBLE SYMPTOM:• Poor driving performance• Knocking occursCAUTION:After servicing or replacing faulty parts, perform Clear Memory M ...

Dtc p0303 cylinder 3 misfire detected

NOTE:For the diagnostic procedure, refer to DTC P0306. Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC P0306 CYLINDER 6 MISFIRE DETECTED1. OUTLINE OF DIAGNOSISNOTE:For the detection sta ...

Other materials:

Malfunction indicator light does not go off
TROUBLE SYMPTOM:Although malfunction indicator light comes on when the engine runs, DTC is not shown on the Subaru Select Monitor or general scan tool display.STEPCHECKYESNO1.CHECK DTC.Is DTC of engine or LAN system displayed- Read Diagnostic Trouble Code (DTC) > OPERATIONCheck the appropriate DTC ...