Subaru Legacy BN/BS (2015-2019) Service Manual: Installation

Subaru Legacy BN/BS (2015-2019) Service Manual / Lighting system / Back-up light bulb / Installation

1. SEDAN MODEL

1. Install the back-up light bulb.

CAUTION:

Use a dry clean cloth so that no grease or water adheres to the glass portion of the bulb.

2. Install the trim panel - trunk lid.

3. Connect the ground terminal to battery sensor. NOTE

2. OUTBACK MODEL

1. Install the back-up light bulb.

CAUTION:

Use a dry clean cloth so that no grease or water adheres to the glass portion of the bulb.

2. Install the bulb inspection cover.

3. Connect the ground terminal to battery sensor. NOTE

Removal

1. SEDAN MODEL1. Disconnect the ground terminal from battery sensor. NOTE2. Remove the trim panel - trunk lid. Trunk Room Trim > REMOVAL3. Remove the bulb socket and back-up light bulb.CAUTION:Use a ...

Back-up light system

...

Other materials:

Dtc p2135 throttle/pedal position sensor/switch "a"/"b" voltage correlation
DTC DETECTING CONDITION:Immediately at fault recognitionTROUBLE SYMPTOM:• Improper idling• Poor driving performanceCAUTION:After servicing or replacing faulty parts, perform Clear Memory Mode Clear Memory Mode > OPERATION, and Inspection Mode Inspection Mode > PROCEDURE.WIRING DIAGRAM: ...