Subaru Legacy BN/BS (2015-2019) Service Manual: Lighting system
Subaru Legacy BN/BS (2015-2019) Service Manual / Lighting system
- Clearance parking light bulb note
- Steering responsive fog lights cm note
- Tail stop light bulb note
- Auto headlight beam leveler control module
- Auto headlight beam leveler system
- Back-up light bulb
- Back-up light system
- Clearance light and illumination light system
- Combination switch (light)
- Day time running light system
- Day time running resistor
- Door step light
- Door switch
- Front fog light assembly
- Front fog light bulb
- Front fog light system
- Front side marker light bulb
- Front turn signal light bulb
- General description
- Hazard switch
- Headlight assembly
- Headlight bulb
- Headlight system
- High-mounted stop light
- Ignition switch illumination
- Interior light system
- Led illumination light
- License plate light
- Light control sensor
- Luggage room light
- Rear combination light assembly
- Rear finisher light assembly
- Rear height sensor
- Rear side marker light bulb
- Rear turn signal light bulb
- Reflex reflector
- Relay and fuse
- Room light
- Side turn signal light assembly
- Spot map light
- Srf off switch
- Stop light system
- Trunk room light
- Turn signal light and hazard light system
- Vanity mirror light
Operation
For details of basic operations, refer to “Application help”. ...
Clearance parking light bulb note
Since the parking light bulb (LED) is a non-disassembled part, it cannot be removed from the headlight assembly. ...
Other materials:
Preparation for overhaul procedure
1. Clean oil, grease, dirt and dust from the transmission.2. Using the TORX® bit T70, remove the drain plug, and drain the transmission gear oil completely.3. Tighten the drain plug using TORX® bit T70.NOTE:Use a new gasket.Tightening torque:44 N·m (4.5 kgf-m, 32.5 ft-lb) (aluminum gasket, ...
© 2017-2025 Copyright www.sulegacy.com
