Honda Civic manuals

Subaru Legacy BN/BS (2015-2019) Service Manual: Inspection

1. Measure the resistance between connector terminals.

Preparation tool:

Circuit tester

Terminal No.

Inspection conditions

Standard

5 — 6

Switch OFF

1 M- or more

Switch ON

Approx. 18 -

2. Replace the overhead console or stereo camera cover if the inspection result is not within the standard value.

Removal
NOTE:• The spot map light is a single unit with the overhead console or stereo camera cover. Replace the overhead console or stereo camera cover if faulty.• Do not remove the spot map ligh ...

Installation
1. Install the spot map light cover and bulb.CAUTION:Use a dry clean cloth so that no grease or water adheres to the glass portion of the bulb.2. Install the overhead console. (Models without EyeSight ...

Other materials:

Inspection
1. Visually check the harness and connector for damage or crack.2. Check the harness terminal for rust, disconnection or poor contact.3. Check the continuity between harness terminals and oil temperature sensor.NOTE:Refer to WIRING SECTION for transmission harness terminal and oil temperature sensor ...

© 2017-2026 Copyright www.sulegacy.com