Subaru Legacy BN/BS (2015-2019) Service Manual: Spot map light

Installation

1. Install the side turn signal light assembly. Outer Mirror Assembly > ASSEMBLY2. Connect the ground terminal to battery sensor. NOTE ...

Removal

NOTE:• The spot map light is a single unit with the overhead console or stereo camera cover. Replace the overhead console or stereo camera cover if faulty.• Do not remove the spot map ligh ...

Other materials:

Assembly
1. Install each cover to the front exhaust pipe.Tightening torque:13 N·m (1.3 kgf-m, 9.6 ft-lb)2. Install the center exhaust pipe to front exhaust pipe.NOTE:Use a new gasket.Tightening torque:42.5 N·m (4.3 kgf-m, 31.3 ft-lb)3. Install the front oxygen (A/F) sensor and rear oxygen senso ...