Subaru Legacy BN/BS (2015-2019) Service Manual: Installation
1. Install the spot map light cover and bulb. CAUTION: Use a dry clean cloth so that no grease or water adheres to the glass portion of the bulb. 2. Install the overhead console. (Models without EyeSight) 3. Install the stereo camera cover assembly. (Models with EyeSight) Stereo Camera > INSTALLATION 4. Connect the ground terminal to battery sensor. NOTE |
Inspection
1. Measure the resistance between connector terminals.Preparation tool:Circuit testerTerminal No.Inspection conditionsStandard5 — 6Switch OFF1 M- or moreSwitch ONApprox. 18 -2. Replace the overhead ...
Srf off switch
...
Other materials:
Dtc p0128 coolant thermostat (engine coolant temperature below thermostat regulating temperature)
DTC DETECTING CONDITION:Detected when two consecutive driving cycles with fault occur.TROUBLE SYMPTOM:Thermostat remains open.CAUTION:After servicing or replacing faulty parts, perform Clear Memory Mode Clear Memory Mode > OPERATION, and Inspection Mode Inspection Mode > PROCEDURE.STEPCHECKYESNO1. ...
