1. Install the bulb and light assembly - door step. CAUTION: Use a dry clean cloth so that no grease or water adheres to the glass portion of the bulb. 2. Connect the ground terminal to battery sensor. NOTE |
Removal
Door switchDtc p0117 engine coolant temperature sensor 1 circuit low
DTC DETECTING CONDITION:Immediately at fault recognitionTROUBLE SYMPTOM:• Hard to start• Improper idling• Poor driving performanceCAUTION:After servicing or replacing faulty parts, perform Clear Memory Mode Clear Memory Mode > OPERATION, and Inspection Mode Inspection Mode > PROC ...