Subaru Legacy BN/BS (2015-2019) Service Manual: Removal

Subaru Legacy BN/BS (2015-2019) Service Manual / Lighting system / Side turn signal light assembly / Removal

1. Disconnect the ground terminal from battery sensor. NOTE

2. Remove the side turn signal light assembly. Outer Mirror Assembly > DISASSEMBLY

Side turn signal light assembly

...

Installation

1. Install the side turn signal light assembly. Outer Mirror Assembly > ASSEMBLY2. Connect the ground terminal to battery sensor. NOTE ...

Other materials:

Installation
1. Apply CVTF to the seal ring and attach it to the seal ring groove of transfer clutch assembly.NOTE:• Use new seal rings.• When installing the seal rings, do not expand the seal rings too much.2. Install the transfer clutch assembly.3. Select the thrust needle bearing. Rear Drive Shaf ...