Subaru Legacy BN/BS (2015-2019) Service Manual: Side turn signal light assembly

Installation

1. Install the lens and bulb.CAUTION:Use a dry clean cloth so that no grease or water adheres to the glass portion of the bulb.2. Install the light assembly - room.3. Connect the ground terminal to ba ...

Removal

1. Disconnect the ground terminal from battery sensor. NOTE2. Remove the side turn signal light assembly. Outer Mirror Assembly > DISASSEMBLY ...

Other materials:

Inspection
1. Remove the bulkhead harness connector from TCM. Transmission Control Module (TCM) > REMOVAL2. Set the ST between the TCM and bulkhead harness.ST 18460AA040CHECK BOARD3. Set the probe of oscilloscope to the check board connector.Terminals:No. 13 (+) — No. 26 (−)(A)+ probe(B)− pro ...