Subaru Legacy BN/BS (2015-2019) Service Manual: Trunk room light

Note

For operation procedures of each component of the stop light system, refer to the respective section.• Rear combination light assembly: Rear Combination Light Assembly• Tail light/stop li ...

Removal

NOTE:Do not remove the trunk room light if removing the bulb only.1. Disconnect the ground terminal from battery sensor. NOTE2. Remove the light assembly - trunk room.(1) Release the claws.(2) Discon ...

Other materials:

Installation
1. Install the pedal assembly.Tightening torque:T: 18 N·m (1.8 kgf-m, 13.3 ft-lb)2. Install the snap pin and clevis pin connecting the operating rod and brake pedal.CAUTION:Always use a new clevis pin.3. Connect the connector to the brake switch.4. Connect the connector to the clutch switch.5 ...