Subaru Legacy BN/BS (2015-2019) Service Manual: Note
For operation procedures of each component of the turn signal and hazard light system, refer to the respective sections. • Headlight Assembly: Headlight Assembly • Combination switch (light): Combination Switch (Light) • Front turn signal light bulb: Front Turn Signal Light Bulb • Side turn signal light assembly: Side Turn Signal Light Assembly • Rear combination light assembly: Rear Combination Light Assembly • Rear turn signal light bulb: Rear Turn Signal Light Bulb • Hazard switch: Hazard Switch |
Inspection
1. CHECK HAZARD LIGHT SYSTEMSTEPCHECKYESNO1.CHECK HAZARD LIGHT OPERATION.1) Turn the hazard switch to ON.2) Check that the hazard light operates properly.Does the hazard light blink-The hazard light s ...
Other materials:
Dtc u0452 invalid data received from restraints control module
DTC DETECTING CONDITION:Defective data was transmitted from steering angle sensor.TROUBLE SYMPTOM:VDC CM does not operate normally.STEPCHECKYESNO1.CHECK PERFORMING OF BASIC DIAGNOSTIC PROCEDURE.Was the basic diagnostic procedure performed up to STEP 8- Diagnostic Procedure with Diagnostic Trouble Co ...
