Subaru Legacy BN/BS (2015-2019) Service Manual: Front turn signal light bulb

Installation

1. Install the front side marker light bulb. Headlight Assembly > ASSEMBLY2. Connect the ground terminal to battery sensor. NOTE ...

Removal

1. Disconnect the ground terminal from battery sensor. NOTE2. Remove the front turn signal light bulb. Headlight Assembly > DISASSEMBLY ...

Other materials:

Installation
1. Install the pedal assembly.Tightening torque:T: 18 N·m (1.8 kgf-m, 13.3 ft-lb)2. Install the snap pin and clevis pin connecting the operating rod and brake pedal.CAUTION:Always use a new clevis pin.3. Connect the connector to the brake switch.4. Connect the connector to the clutch switch.5 ...