Subaru Legacy BN/BS (2015-2019) Service Manual: Installation

Subaru Legacy BN/BS (2015-2019) Service Manual / Lighting system / Led illumination light / Installation

1. GLOVE BOX LIGHT

1. Install the light - pocket.

2. Install the light - pocket cover.

3. Install the pocket assembly.

4. Connect the ground terminal to battery sensor. NOTE

2. POCKET LIGHT

1. Install the light - pocket.

2. Install the heater control assembly.

3. Connect the ground terminal to battery sensor. NOTE

3. DOOR POCKET LIGHT

1. Install the light - door pocket.

2. Install the trim panel - front door. Door Trim > INSTALLATION

3. Connect the ground terminal to battery sensor. NOTE

Removal

1. GLOVE BOX LIGHT1. Disconnect the ground terminal from battery sensor. NOTE2. Remove the pocket assembly. Glove Box > REMOVAL3. Remove the light - pocket cover.CAUTION:When using a flat tip screwd ...

License plate light

...

Other materials:

Installation
1. Clean the mating surface of valve cover and transmission side.CAUTION:When cleaning the mating surface of the transmission side, be careful not to allow any dust, foreign matter and used liquid gasket to enter the transmission.2. Check the control valve body for dust and other foreign matter.3. I ...