Subaru Legacy BN/BS (2015-2019) Service Manual: Rear side marker light bulb

Installation

1. Install the sensor assembly - headlight beam leveler.Tightening torque:7.5 N·m (0.8 kgf-m, 5.5 ft-lb)2. Install the rear wheels.Tightening torque:120 N·m (12.2 kgf-m, 88.5 ft-lb)3. Lo ...

Removal

1. SEDAN MODEL1. Disconnect the ground terminal from battery sensor. NOTE2. Remove the trunk trim panel - side. Trunk Room Trim > REMOVAL3. Remove the rear side marker light bulb. Rear Combination ...

Other materials:

Inspection
1. Remove the bulkhead harness connector from TCM. Transmission Control Module (TCM) > REMOVAL2. Set the ST between the TCM and bulkhead harness.ST 18460AA040CHECK BOARD3. Set the probe of oscilloscope to the check board connector.Terminals:No. 14 (+) — No. 42 (−)(A)+ probe(B)− pro ...