Subaru Legacy BN/BS (2015-2019) Service Manual: Auto headlight beam leveler system

Installation

1. Install the auto headlight beam leveler CM.Tightening torque:7.5 N·m (0.8 kgf-m, 5.5 ft-lb)2. Install the relay holder.3. Install the panel - knee guard.Tightening torque:7 N·m (0.7 k ...

Procedure

When parts related to the auto headlight beam leveler system are removed or replaced, perform the following procedures to initialize or reinitialize.NOTE:Before performing initialization or reinitiali ...

Other materials:

Disassembly
1. Disconnect the terminal M from the magnet switch assembly.2. Remove the magnet switch assembly from the starter housing assembly.3. Remove screws (A) and bolts (B) of the brush holder assembly, and remove the starter cover assembly.4. Remove the brush holder assembly from the armature assembly.NO ...