Subaru Legacy BN/BS (2015-2019) Service Manual: Disassembly

Subaru Legacy BN/BS (2015-2019) Service Manual / Lighting system / Front fog light assembly / Disassembly

CAUTION:

Use a dry clean cloth so that no grease or water adheres to the glass portion of the bulb.

Rotate in the direction of arrow shown in the figure to remove the front fog light bulb.

• Sedan model

• OUTBACK model

Installation

CAUTION:Install the mud guard - front so that the front end of the mud guard (b) comes outside the bumper face - front (a).1. Install the fog light assembly - front.2. Install the mud guard - front.3. ...

Assembly

CAUTION:Use a dry clean cloth so that no grease or water adheres to the glass portion of the bulb.Install the front fog light bulb. ...

Other materials:

Installation
1. Install the starter to the transmission, and install the bolts or nuts securing the starter.NOTE:• For the MT model, a bolt is used at (a).• Tighten the starter and bracket (b) together using the upper bolt securing the starter.Tightening torque:50 N·m (5.1 kgf-m, 36.9 ft-lb)2. ...