Subaru Legacy BN/BS (2015-2019) Service Manual: Dtc p1497 coil 3 egr "a" control circuit high

Subaru Legacy BN/BS (2015-2019) Service Manual / Engine (diagnostics)(h4do) / Diagnostic procedure with diagnostic trouble code (dtc) / Dtc p1497 coil 3 egr "a" control circuit high

NOTE:

For the diagnostic procedure, refer to DTC P1499. Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC P0851 PARK/NEUTRAL SWITCH INPUT CIRCUIT LOW

1. OUTLINE OF DIAGNOSIS

NOTE:

For the detection standard, refer to DTC P1493. Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC P1493 COIL 1 EGR "A" CONTROL CIRCUIT HIGH

Dtc p1498 coil 4 egr "a" control circuit low

DTC DETECTING CONDITION:Immediately at fault recognitionTROUBLE SYMPTOM:• Improper idling• Poor driving performance• Engine breathingCAUTION:After servicing or replacing faulty parts ...

Dtc p1496 coil 3 egr "a" control circuit low

NOTE:For the diagnostic procedure, refer to DTC P1498. Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC P1498 COIL 4 EGR "A" CONTROL CIRCUIT LOW1. OUTLINE OF DIAGNOSISNOTE:For the detect ...

Other materials:

Installation
1. Select shims for pulley alignment. Primary Pulley and Secondary Pulley > ADJUSTMENT2. Install the seal ring to the input shaft.NOTE:• Use new seal rings.• When installing the seal rings, do not expand the seal rings too much.• Apply CVTF to the seal rings.3. Install the seal ri ...