Subaru Legacy BN/BS (2015-2019) Service Manual: Dtc u0074 control module communication bus "body-can" off

Subaru Legacy BN/BS (2015-2019) Service Manual / Telematics system (diagnostics) / Diagnostic procedure with diagnostic trouble code (dtc) / Dtc u0074 control module communication bus "body-can" off

Detected when CAN line abnormality is detected.

NOTE:

Perform the diagnosis for LAN system. Basic Diagnostic Procedure > PROCEDURE

Dtc b2a00 vin reading

DIAGNOSIS START CONDITION:When ignition switch is ON.TROUBLE SYMPTOM:When ignition switch is ON, VIN information (CAN) sent from ECM cannot be read.DTC DETECTING CONDITION:• Telematics function ...

Dtc u0101 lost communication with tcm

Detected when CAN data from TCM does not arrive.NOTE:Perform the diagnosis for LAN system. Basic Diagnostic Procedure > PROCEDURE ...

Other materials:

Removal
CAUTION:• Be sure to prevent water or oil from contacting the connector terminal of secondary pressure sensor. If adhesion occurs, replace with a new part.• When removing secondary pressure sensor, CVTF may let out. If CVTF has leaked, adjust the CVTF level after installing the secondary ...