Honda Civic manuals

Subaru Legacy BN/BS (2015-2019) Service Manual: Dtc u0101 lost communication with tcm

DTC DETECTING CONDITION:

No data is received from TCM.

TROUBLE SYMPTOM:

Cooperation control with transmission is not performed.

STEPCHECKYESNO

1.CHECK PERFORMING OF BASIC DIAGNOSTIC PROCEDURE.

Was the basic diagnostic procedure performed up to STEP 8-

Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC U0101 LOST COMMUNICATION WITH TCM

Perform the basic diagnostic procedure. Basic Diagnostic Procedure

2.CHECK DTC.

Check the displayed DTC.

Are DTCs other than U*** displayed-

Perform the diagnosis according to DTC.

Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC U0101 LOST COMMUNICATION WITH TCM

3.CHECK DTC.

Check the displayed DTC.

Is U0101 a current malfunction-

Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC U0101 LOST COMMUNICATION WITH TCM

Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC U0101 LOST COMMUNICATION WITH TCM

4.CHECK DTC.

1) Check CAN communication circuit. CAN Communication Circuit Check

2) Read the DTC using Subaru Select Monitor.

Is U0101 a current malfunction-

Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC U0101 LOST COMMUNICATION WITH TCM

Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC U0101 LOST COMMUNICATION WITH TCM

5.CHECK DTC.

Using the Subaru Select Monitor, read DTC of all the systems.

Is the transmission data no-receive detected in several modules-

Replace the TCM. Transmission Control Module (TCM)

Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC U0101 LOST COMMUNICATION WITH TCM

6.REPLACE MODULE.

1) Replace the TCM.

2) Read the DTC using Subaru Select Monitor.

Is U0101 a current malfunction-

Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC U0101 LOST COMMUNICATION WITH TCM

System is normal.

7.CHECK MODULE.

1) Reinstall the TCM.

2) Replace the module that the DTC has been detected.

3) Read the DTC using Subaru Select Monitor.

Is U0101 a current malfunction-

Replace the TCM. Transmission Control Module (TCM)

System is normal.

8.CHECK HARNESS.

1) Shake the harness, and check for poor contact.

2) Read the DTC using Subaru Select Monitor.

Is U0101 a current malfunction-

Repair the poor contact of harness, or replace the harness.

Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC U0101 LOST COMMUNICATION WITH TCM

9.CHECK CONNECTOR.

Check the connector used for high speed CAN for poor contact.

Is there poor contact of connector-

Repair the connector that has poor contact, or replace harness.

It is possible that temporary poor communication occurs. Delete the DTC.

Dtc u0074 control module communication bus "body-can" off
DTC DETECTING CONDITION:Integrated unit communication is shut down because of high speed CAN error.TROUBLE SYMPTOM:CAN communication is not normal.STEPCHECKYESNO1.CHECK PERFORMING OF BASIC DIAGNOSTIC ...

Dtc u0100 lost communication with ecm/pcm "a"
DTC DETECTING CONDITION:No data is received from ECM.TROUBLE SYMPTOM:Cooperation control of transmission may not operate properly.STEPCHECKYESNO1.CHECK PERFORMING OF BASIC DIAGNOSTIC PROCEDURE.Was the ...

Other materials:

Inspection
1. VISUAL INSPECTIONCheck for the following items, and if any malfunction is found, replace the corresponding part.• Make sure the nozzle - rear washer and the hose - rear washer are not clogged.• Make sure the hose - rear washer is not bent.2. INSPECTING THE SPRAY POSITION1. Turn the wi ...

© 2017-2024 Copyright www.sulegacy.com