Subaru Legacy BN/BS (2015-2019) Service Manual: Diagnostic procedure with diagnostic trouble code (dtc)
Subaru Legacy BN/BS (2015-2019) Service Manual / Lan system (diagnostics) / Diagnostic procedure with diagnostic trouble code (dtc)
- Dtc u1433 invalid data received from eyesight
- Dtc u0075 control module communication bus "pu-can" off
- Dtc u1235 lost communication with eyesight
- Dtc u0452 invalid data received from restraints control module
- Dtc u0428 invalid data received from steering angle sensor module
- Dtc u0073 control module communication bus off
- Dtc u0427 invalid data received from vehicle security control module
- Dtc u0424 invalid data received from hvac control module
- Dtc u0423 invalid data received from instrument panel cluster control module
- Dtc u0422 invalid data received from body control module
- Dtc u0420 invalid data received from power steering control module
- Dtc u0417 invalid data received from park brake control module
- Dtc u0416 invalid data received from vehicle dynamics control module
- Dtc u0402 invalid data received from tcm
- Dtc u0401 invalid data received from ecm/pcm "a"
- Dtc u0327 software incompatibility with vehicle security control module
- Dtc u0164 lost communication with hvac control module
- Dtc u0155 lost communication with instrument panel cluster (ipc) control module
- Dtc u0181 lost communication with headlamp leveling control module
- Dtc u0151 lost communication with restraints control module
- Dtc u0140 lost communication with body control module
- Dtc u0131 lost communication with power steering control module
- Dtc u0128 lost communication with park brake control module
- Dtc u0126 lost communication with steering angle sensor module
- Dtc u0122 lost communication with vehicle dynamics control module
- Dtc u1232 lost communication with rear/side radar control module
- Dtc u1422 invalid data received from body control module body-can
- Dtc u1140 lost communication with body control module body-can
- Dtc u0162 lost communication with audio visual navigation display module
- Dtc u0426 invalid data received from immobilizer control module
- Dtc u0167 lost communication with immobilizer control module
- Dtc u0074 control module communication bus "body-can" off
- Dtc u0101 lost communication with tcm
- Dtc u0100 lost communication with ecm/pcm "a"
Electrical specification
• Body integrated unitFor I/O signals of the body integrated unit, refer to BODY CONTROL SYSTEM (DIAGNOSTICS). Control Module I/O Signal• Engine CMFor I/O signals of ECM, refer to ENGINE ...
Dtc u1433 invalid data received from eyesight
DTC DETECTING CONDITION:Defective data was transmitted from stereo camera.TROUBLE SYMPTOM:Cooperation control of EyeSight does not operate properly.STEPCHECKYESNO1.CHECK PERFORMING OF BASIC DIAGNOSTIC ...
Other materials:
Assembly
NOTE:After assembling, manually turn the pulley to check that the rotor rotates smoothly.1. Use the following procedures to install the rectifier.(1) Remove old silicone grease on the mating surface of rear cover and rectifier and apply new silicone grease.CAUTION:Do not apply silicone grease to the ...
© 2017-2026 Copyright www.sulegacy.com
